PENGENDALIAN KUALITAS PRODUK CYLINDER HEAD DENGAN MENGGUNAKAN METODE SEVEN TOOLS DI PT. X
Indonesia
Abstract
Abstract. PT. X is one of the motorcycle companies in Indonesia, many good quality motorcycles have been produced and marketed in Indonesia. There are various kinds of components made at PT. X to assemble a motorcycle, one of which is a cylinder head which is part of a motorcycle engine. In producing cylinder heads PT. X certainly has problems that occur, one of the problems that occurs is the dominance of reject products misrun chain among other rejects. This research was conducted using several seven tools methods, namely histograms, pareto diagrams and fishbone charts by focusing on analyzing problems in the most dominant types of rejects and the results of this study are knowing the causes of problems in the most dominant types of rejects with fishbone charts and why-why analysis.
References
Abdul Latief Sulam. (2008) Pembuatan Benang dan Kain
Borse, R. B., Suryawanshi, U. R., Kolte, P. P., Shinde, T. A., Turukamane, R. N., & Raichurkar, P.
P. (2018). Effect of process parameter on texturized yarn properties. Man-Made Textiles in India, 46(4).
Budianto, Aris, et al. "Optimasi Respon Tunggal pada Proses Texturing Benang Dty-150d/96f Menggunakan Metode Taguchi." (2020).
Challa, Sushmita, and Cindy Harnett. "Packaging Electronics on Textiles: Identifying Fiber Junctions for Automated Placement." International Manufacturing Science and Engineering Conference . Vol. 84263. American Society of Mechanical Engineers, 2020.
GOYAL, Ashvani. Yarn formation and recent developments. Fibres to Smart Textiles, 2019, 31-61.
Caldas, Pedro, et al. "Automatic system for yarn quality analysis by image processing." Journal of the Brazilian Society of Mechanical Sciences and Engineering 44.11 (2022): 565.
Hearle, John WS, Les Hollick, and D. Keith Wilson. " Yarn texturing technology." (2001). Suyatno, (2017) Materi Perkuliahan Smester 4. Polyester
Suyatno, (2017) Materi Perkuliahan Smester 4. Teknologi Penyempurnaan Tekstil.
Ivanto, Muhammad. (2012) Pengendalian Kualitas roduksi Koran Menggunakan Seven Tools pada PT Akcata Pariwara. Kubu Raya: Universitas Tanjungpura.
Maity, Subhankar, Bibekananda Basu, and Abhishek Mishra. "Comparative Performance of Textured Yarn Drawn through Apron and Godet in Draw Texturing Machine." Tekstilec (2024): 56-67.
Mohammadi, Elham, Marjan Abbasi, and Mahdi Nouri. " The effect of aging and first heater temperature on the physical properties of polybutylene terephthalate textured yarn." Polymer Crystallization 2.5 (2019): e10083.
Ortega, Mathias, et al. "A Review on False-Twist Texturing." Fibers 12.4 (2024):
Sareminia, Saba, Zahra Ghayoumian, and Fatemeh Haghighat. " Developing a data-driven operational gude for the texturized yarn production process: data mining and intelligence approach.
Singh, Mukesh Kumar, and Bijoy Kumar Behera. "The effect of denier per f ilament (DPF) on low- stress mechanical and transmission behaviour of polyester f ilament fabrics." The Journal of The Textile Institute 113.7 (2022): 1487-1495.
Tarihoran, N., Siregar, K., Ishak, A. (2013). Analisis Pengendalian Kualitas pada Proses Perebusan dengan Menerapkan QCC (Quality Control Circle) di PT. XYZ. Medan: Universitas Sumatera Utara.
Trung, Tran Duc, Chu Dieu Huong, and Dao Anh Tuan. "Inf luence of some winding parameters on hairiness of yarn after winding process." Fibres and Textiles 29.4 (2022
Zhang, Shihan, et al. "Draw textured yarn packages hairiness defect detection based on the multi- directional anisotropic gaussian directional derivative." Fibers and Polymers 23.13 (2022): 3655- 3664.