SIMULASI SISTEM ANTRIAN LOKET PARKIR KENDARAAN DI MALL STS (SADANG TERMINAL SQUARE)
SIMULASI SISTEM ANTRIAN
Abstract
Vehicle queues formed in front of the gate of the ticket collection counter at STS Mall can cause problems and queue lengths that can interfere with other traffic movement systems. Therefore, it is very important to review the queuing system at the gate of the parking ticket collection counter at STS Mall. This study aims to examine the queuing system and determine alternatives to improve four-wheeled vehicle queuing services at the ticket collection counter to enter the parking lot at STS Mall. The main data needed in this study are vehicle arrival rates and counter service times. The data were obtained respectively using traffic enumeration methods and sampling observations, which were carried out at the entrance counter of four-wheeled vehicles and carried out on Saturdays and Sundays. The analysis method uses Queue Theory. The results of the analysis show that the number of counters 1 piece is still able to serve the current level of vehicle arrivals which gives a value of n ranging from 0.34 - 0.37 vehicles (( 1 vehicle) , q ranging from 0.08 - 0.06 vehicles (( 1 vehicle), d ranging from 8.2 - 8.6 seconds, and w ranging from 2.1 - 2.5 seconds. At an arrival rate above 600 vehicles / hour are no longer able to be served with the number of counters (N) as much as 1 piece without improving the queuing system
References
Haekal, J. (2021). Application of Lean Six Sigma Approach to Reduce Worker Fatigue in Racking Areas Using DMAIC, VSM, FMEA and ProModel Simulation Methods in Sub Logistic Companies: A Case Study of Indonesia. International Journal of Engineering Research and Advanced Technology (ijerat)(E-ISSN 2454-6135) DOI: 10.31695/IJERAT, 7(6), 1-11.
Haekal, J. (2021). Improving Work Efficiency and Productivity with Line Balancing and TPS Approach and Promodel Simulation on Brush Sub Assy Line in Automotive Companies. International Journal of Scientific Advances ISSN, 2708-7972.
Inayati Nasrudin, Sofiani Nalwin Nurbani. (2019) Perbaikan Sistem Kerja Dalam Meningkatkan Produktifitas Dan Efektifitas Waktu Kerja Produksi Bagi Pengusaha Kerupuk Kulit Dorokdok (Umkm) Di Sukarenggang Kabupaten Garut, Retims, Vol.1 No. 2 November 2019, Pp 96-103
Klomjit, P., Anurattananon, C., Chatmuangpak, A., & Amaluk, A. (2020). Efficiency Improvement by Simulation Technique in the Parcel Service Company. Science & Technology Asia, 20-29.
Nuning Artati, Muhamad Soleh, Faisal Amri. (2020) Simulasi Pro-Model dan Optimasi Produksi dan Reduksi Bottleneck Industri Spring Foam, Intuisi Teknologi Dan Seni, Edisi 12 No. 1 April 2020, pp 7-20
Phanden, R. K., Chhabra, J., Chaudhary, T., & Kaliramna, A. (2021). Improvements in Production Line Using ProModel© Simulation Software: A Case Study of Beer Beverage Company in India. In Advances in Industrial and Production Engineering: Select Proceedings of FLAME 2020 (pp. 9-21). Springer Singapore.
Riyanto, OAW. 2016, Simulasi Model Sistem Kerja Pada Departemen Injection Untuk Meminimasi Waktu Work-In-Process. Vol. 15 (1): 69-78.
Toffaha, K. M., & Dongyan, S. (2020). Diary Factory ProModel Modeling and Simulation, Layout Assessment and Improvement. In Transactions on Engineering Technologies: World Congress on Engineering and Computer Science 2018 26 (pp. 74-86). Springer Singapore.
Trenggonowati, DL. 2016, Simulasi Sistem Produksi Di PT. Jakarta Cakra Tunggal Steel Mills. Vol. 4 No. 1, 36 – 46.
Yudhanegara, D., & Gumelar, I. (2020). LOGISTIC TRANSPORTATION TECHNOLOGY IN DETERMINING VEHICLE ROUTES USING SIMULATED ANNEALING FOR EFFICIENCY OF TWO WHEELS FUEL CONSUMPTION. Jurnal Teknologika, 10(1).
