Performance analysis of vacuum forming machines for the plastic material acryolonitrile butadiene styrene (abs)
Vc
Abstract
Plastic is a polymer material (usually an organic material) that has a high molecular weight in solid form which, when heated slowly, becomes soft and can be shaped an shaped as desired. The aim of this research is to build a vacuum forming machine. This will enable us to package a variety of products used in the home and factory industries and design a vacuum forming machine to meet the needs of the household industry. The operating principle of thermoforming and vacuum forming is used by most small and medium business for various types of product packaging. Thermoforming is a forming process where the properties of plastic fil change to become soft and flexible after going through a heating process and then using preassure or suction which adjust the shape of the mold. The vacuum forming machine consists of 3x3 hollow iron, angle iron, pallet board, 1inch iron pipe, and 2inch iron pipe. The result of the manufacture of this vacuum forming machine include several temperature stages using acryolonitrile butadiene styrene (abs) plastic material 1.5mm, square wood is used for the mold, with a heating temprature of 60-90℃, Maximum test result were obtained at a temperature of 90°C with a vacuum time 120 second.
References
Calhyaldi D. (2017). Potensi Industri Produk Plalstik Berbalsis Industri Rumalh Talnggal dengaln ALlalt Valcuum Forming Sederhalnal.InSeminalrNalsionall LP2M UNM.
Klein, P. W. (2009) Fundalmentalls of Plaltics Thermoforming, Journall of Experimentall Psychology: Generall. Morgaln & Clalypool Publishers.
Murallisrinivalsaln, N. S. (2010). Updalte on troubleshooting in thermoforming.
nusyirwaln (2017). Rekalyalsal mesin thermoforming valcuum Paldalng: Politeknik Negeri Paldalng
JMPM: Jurnall Malteriall daln Proses Malnufalktur-Vol.1, No.2, 87-95, Desember 2017 http://journall.umy.alc.id/index.php/jmpm.
Peralncalngaln Mesin Thermoforming Untuk Produk Tutup Plalstik Cup Prosiding SEMNALSTERAL (Seminalr Nalsionall Teknologi daln Riset Teralpaln) Politeknik Sukalbumi, 20 Oktober 2020.
MALMPU BENTUK PLALSTIK PALDAL PROSES VALCUUM FORMING DENGALN
VALRIALSI TEKALNALN 0.979 balr, 0.959 balr, 0.929 balr, 0.909 balr PALDAL
TEMPERALTUR 200 ºC Jurnall Teknik Mesin S-1, Vol. 2, No. 2, Talhun 2014 Online: http://ejournall-s1.undip.alc.id/index.php/jtm..
ALNALLISAL PENGALRUH VALRIALSI TEKALNALN DALN TEMPERALTUR TERHALDALP KESENJALNGALN VOLUME PEMBENTUKALN POLIKALRBONALT PALDAL PROSES VALCUUM FORMING DENGALN METODE TALGUCHI JURNALL JMMME, Desember 2021, Vol 1.
Malnembalh, HS. & Pralsetyal, S (2018). Ralncalng Balngun Sistem Otomaltisalsi Paldal Mesin Valcuum Forming. Seminalr Nalsionall Teknik Mesin, Politeknik Negeri Jalkalrtal, Hall 103-110.
PERALNCALNGALN MESIN VALCUUM FORMING UNTUK MALTERIALL PLALSTIK POLYSTYRENE (PS) DENGALN UKURALN MALKSIMALL CETALKALN 400x300x150 (mm3 ) JMPM: Jurnall Malteriall daln Proses Malnufalktur-Vol.1, No.2, 87-95, Desember 2017 http://journall.umy.alc.id/index.php/jmpm.
Mervalt. et all. (2010). Plalstic Injection Technology. Shoubral : Falculty of Engineering, Benhal University.
ISSN 2085-2762 Seminalr Nalsionall Teknik Mesin POLITEKNIK NEGERI JALKALRTAL.
M. Pralkalsh, P. S. Malhaldeo, N. G. Vitthall, D. Ralmchalndral, alnd G. P. ALshok,
“Design & Development of Valccum Forming Malchine,” no. 1, pp. 20–24, 2016