Rancang Bangun Prototype Jemuran Pakaian Otomatis Berbasis Internet Of Things (Iot) Dengan Raindrop Sensor Dan Sensor Light Dependent Resistor (Ldr)Di Leon Laundry
Abstract
Unpredictable weather often complicates the process of drying clothes, especially when rain suddenly falls. This becomes a challenge for both households and laundry businesses. This research aims to design an automatic clothes drying system based on the Internet of Things (IoT), utilizing a rain sensor and a light sensor to detect weather conditions in real-time and automatically adjust the position of the drying rack. The research uses the prototype method, which includes rapid design, device construction, and system testing. The device is controlled by a NodeMCU ESP8266 and connected to the Blynk application for remote monitoring. A BYJ-48 stepper motor moves the drying rack based on input from the rain sensor and LDR (Light Dependent Resistor). Test results show that the system works well and responds quickly to weather changes. The drying rack automatically retracts during rain or low light conditions and extends when the weather is clear. This system offers convenience, efficiency, and a practical solution for everyday clothes drying activities
References
A. Fachri Radjab et al., Prakiraan Musim Hujan 2023/2024 di Indonesia. Jakarta: BMKG, 2023.
M. Nasir and J. O. Brusa, “Application of the Internet of Things in Smart Laundry,” Technology and Industry |, vol. 1, no. 3, pp. 93–104, 2023, [Online]. Available: https://bestijournal.org
N. Nasution et al., “Sistem Otomatisasi Jemuran Pakaian dengan Sensor Hujan dan Sensor LDR Berbasis Arduino Uno,” Jurnal Fisika Unand(JFU), vol. 12, no. 1, pp. 125–131, 2023, doi: 10.25077/jfu.12.1.125-131.2023.
S. Hidayatulloh and J. Aryanto, “Sistem Pengendalian Jemuran Otomatis berbasis IoT dengan Logika Fuzzy untuk Pengkondisian Cuaca,” Edumatic: Jurnal Pendidikan Informatika, vol. 7, no. 2, pp. 287–296, 2023, doi: 10.29408/edumatic.v7i2.21515.
A. D. Harianto, A. Sudaryanto, A. Kridoyono, and M. Sidqon, “Rancang Bangun Alat Pelindung Jemuran Berbasis Arduino Dengan Sensor Hujan Dan Sensor Cahaya,” Informatics, Electrical and Electronics Engineering (Infotron), vol. 2, no. 1, pp. 1–5, 2022, doi: 10.33474/infotron.v2i1.14696.
A. M. Asmiddin, L. A. La Atina, and W. A. Anjani, “Rancang Bangun Jemuran Pakaian Otomatis Berbasis Internet of Things,” Jurnal Informatika, vol. 12, no. 1, pp. 50–59, 2023, doi: 10.55340/jiu.v12i1.1309.
S. Wulandari, J. Jupriyadi, and M. Fadly, “Rancang Bangun Aplikasi Pemasaran Penggalangan Infaq Beras (Studi Kasus: Gerakan Infaq),” TELEFORTECH: Journal of Telematics and Information Technology, vol. 2, no. 1, pp. 11–16, 2021.
A. Selay et al., “Karimah Tauhid, Volume 1 Nomor 6 (2022), e-ISSN 2963-590X,” Karimah Tauhid, vol. 1, no. 2963–590X, pp. 861–862, 2022.
Y. Darnita, A. Discrise, and R. Toyib, “Prototype Alat Pendeksi Kebakaran Menggunakan Arduino,” Jurnal Informatika Upgris, vol. 7, no. 1, pp. 3–7, 2021, doi: 10.26877/jiu.v7i1.7094.
H. Timothy Wijaya, D. Pangestu, M. Timothy Sutjipto, W. Surya Widjaja, K. Octavianus Bachri, and T. Nur, “Simulasi Sistem Pengendalian Motor Stepper dengan Metode Pulse Width Modulation,” Jurnal Elektro, vol. 15, no. 1, pp. 21–30, 2024, doi: 10.25170/jurnalelektro.v15i1.5120.
Rahmat and W. Wiyono, “Rancangbangun Perangkat Kendali Motor Stepper Dengan Mikrokontroler,” Teknika, vol. 7, no. 3, pp. 99–107, 2022, doi: 10.52561/teknika.v7i3.180.
N. Dewi, M. Rohmah, and S. Zahara, “Jurnal 5.14.04.11.0.097 Nurul Hidayati Lusita Dewi,” Teknologi Informasi, pp. 3–3, 2022.
S. Mindasari, M. As’ad, and D. Meilantika, “Sistem Keamanan Kotak Amal di Musala Sabilul Khasanah Berbasis Arduino UNO,” Jurnal Teknik Informatika Mahakarya (JTIM), vol. 5, no. 2, pp. 7–13, 2022.
Y. Yantoro, “Fungsi Power Supply pada Simulator Sistem Peringatan Dini Pengendalian Banjir dengan Menggunakan Electronic Data Proces,” Jurnal Orang Elektro, vol. Vol.3, No., pp. 1–6, 2021.
